Vacuum Coaxial Type Homogenizer

Application: 

EBR/IV Series Coaxial Vacuum Type Homogenizer apply on all kinds of ointment, ointment, cosmetics, skin care products, cream and other paste products; The machine has the advantages of combined structure, convenient operation, novel appearance and reliable performance. It is the choice for mass production of pharmaceutical, biological, cosmetic, chemical, food, petroleum and other customers.

Working principle: 

After the main pot is heated to a certain temperature, the temperature can be controlled, generally at 0-90 degrees. In special cases, the temperature can be increased to 100-300 degrees with imported oil. We can customize it according to the customer's process requirements. After heating to the required temperature, since the main pot is in vacuum, the materials of oil pot and water pot are pumped to the main pot, opened for homogenization (high speed), and started for mixing (wall hanging mixing). At the same time, the main pot can also be opened separately. The main pot is in vacuum, and a large number of bubbles generated by mixing are pumped away in time. In this way, the products produced are delicate, shiny and soft to meet the requirements of customers.

Features: 

the pot cover is of hydraulic lifting type. Water, oil and materials can directly enter the emulsifying pot under vacuum through the pipeline. The discharge mode is mainly pot turnover type and pot bottom valve discharge type. The heating of materials can be realized by heating the interlayer of the pot through electricity or steam. The heating temperature can be set arbitrarily and controlled automatically. The cooling liquid can be connected into the interlayer to cool the materials, the operation is simple and convenient, and the interlayer is equipped with a thermal insulation layer. The homogenization system and mixing system can be used separately or at the same time. The granulation, mixing, blending, dispersion, emulsification, etc. of materials can be completed in a short time. The parts in contact with materials are made of high-quality stainless steel (commonly used 304, medical 316L), the inner surface is polished, the vacuum stirring device is sanitary and clean, and is manufactured according to the hygienic standards of GMP. It is an ideal toothpaste cream production equipment for customers.

In the skin care equipment industry, the vacuum emulsifier is a complicated non-standard automatic equipment, but it is generally ineffective in homogenization, pumping and vacuum distillation, dumping or underwater concrete feeding. To consider its quality, it is recommended to master the principle of the vacuum emulsifier, the homogenizer and its mixing system software. For the vacuum emulsifier, the vacuum emulsifier mainly consists of the preparation pot, the main pot, the mechanical pump, the hydraulic press, and the household appliances. automatic control system etc. To put it bluntly, vacuum emulsion refers to the use of high shear to evenly distribute one phase or several phases to another continuously in the state of a vacuum pump. In the narrow gap, it receives hundreds of thousands of times of hydraulic transmission per minute, such as cutting, hitting and tearing, and other comprehensive effects, and evenly disperses the emulsion in an instant. Through high-frequency cycles, it finally obtains fine and stable high-quality products without air bubbles. Quality merchandise.

Vacuum emulsifying machine is a very important and unique industrial equipment in the production line of food industry, medicine and skin care products. It is widely used. Many products in our daily life are closely related to each other. It can be mainly used in skin care products, food industry, chemical industry, medicine, and other industries. It mixes cream raw materials under the condition of a mechanical pump to obtain high-quality products, such as tooth cleaning powder and shampoo that are used in daily life. , Moisturizing cream, high-end moisturizing lotion essence, etc. can be processed according to it.

In production and processing, in order to better maintain the efficiency of mechanical pump black anti-static tweezers and the quality of production and processing products, and to better improve the use of black anti-static tweezers, the tweezers should be standardized as much as possible. With the use and maintenance, I warmly remind the black anti-static tweezers to pay attention to the following items when they are in state and after use.

During normal production and processing, it is easy for workers to ignore the inspection of the operation of the machine and equipment. Therefore, it is generally reliable to have professional and technical personnel from black anti-static tweezers manufacturers to adjust on-site

Process workers should pay attention to avoid improper use when operating process machinery and equipment, and check the operation status at any time to prevent equipment damage and raw material damage caused by illegal operations. Sequence of operation and feeding. Clearing method

Selection, feeding method, geographical environment handling in the whole process of work, etc., are easy to cause equipment damage or use safety problems due to negligence, such as accidentally using dirty things

The tweezers caused damage to the pot. For the sake of convenience, the order of operation was not in accordance with the requirements, resulting in damage and material damage. The items leaked to the ground during feeding were not removed immediately, causing personal safety problems such as slipping and bruising;

It cannot be investigated afterwards, so customers must strengthen supervision to avoid it. In addition, the vacuum emulsification machine manufacturer reminds that during the whole work process

Odor, sudden vibration and other abnormal phenomena, workers should check immediately and deal with them properly, and must prevent the awareness of processing after production and processing, so as to prevent serious damage and hazards caused by common faults.

1.Do a good job in the daily cleaning service of the vacuum emulsifying machine.

2. Maintenance of machinery and equipment for electrical products: It is necessary to ensure that the intelligent automatic control system of machinery and equipment and electrical products is clean and tidy, clean and hygienic, and moisture-proof and anti-corrosion.

work. If these aspects are not done well, it may cause great harm to electrical equipment, or even damage electrical equipment. (Note: Turn off the electric brake switch before maintenance of electrical products

Switch the power box, do a good job of safety warning signs and safety protection work).

3. Heating system: the gate valve should be maintained to prevent the cut-off valve from rusting and sticking to failure, and the steam trap should be checked on time to prevent dirt from clogging.

4. Ultrafiltration device: Ultrafiltration device, especially water ring vacuum pump, in the whole process of use, sometimes due to rust or dirt, the rotor will be stuck and the motor will be killed. Therefore, it must be

conditions; the water ring system must be smooth. If there is a blockage when the vacuum pump is running during use, the vacuum pump should be stopped immediately, and the vacuum pump can be restarted after it is turned off.

5. Airtight system: Black anti-static tweezers have many seals. The mechanical seal should be disassembled on time. The cycle depends on the normal use of the equipment. The double inner hole mechanical seal should be checked frequently to prevent

Mechanical seal; Skeleton seal, according to the characteristics of the material, select the appropriate material, and disassemble it in time according to the user manual during use.

6. Lubrication: For motors and reducers, disassemble the lubricating grease on time according to the operation guide. If it is frequently used, check the viscosity and acid value of the lubricating grease in advance, and disassemble the lubricating grease in advance.

7. During the process of equipment use, customers should try their best to send electrical instruments, etc. to relevant departments for measurement and testing in time to ensure the safety of equipment operation.

8. If there is abnormal sound or other problems during the operation of the black anti-static tweezers of the mechanical pump, it should be checked immediately, and then run after the fault inspection.

Tagiau poblogaidd: vacuum coaxial type homogenizer, suppliers, manufacturers, cost, price, for sale